list [id|type ...]
List the current state of all available devices. The command output format is
deprecated, see the section DESCRIPTION. It is a good idea to check with list
command id or type scope is appropriate before setting block or unblock. Special
all type string will match everything. Use of multiple id or type arguments is
block id|type [...]
Disable the corresponding device.
unblock id|type [...]
Enable the corresponding device. If the device is hard-blocked, for example via a
hardware switch, it will remain unavailable though it is now soft-unblocked.
iw phy phy0 info
iw phy phy0 interface add mon0 type monitor
iw dev wlan0 del
ifconfig mon0 up